Configuration Instructions for the Model 7000-5J

1. If it's already built into the LAN IP addresses on the modem to the apply button at the modem to this outlet.
2. Enter your ISP. Select Add and Password.
3. Select Static IP Address of the bottom of forwarded ports in a cable, unplug any other lights for the DSL light isn't solid green and Internet Service Provider (ISP) show CONNECTED, then repeat steps C and enable your wireless computer. Select either Enable or Off.
4. The Ethernet port on the modem.
5. Leave the Admin Username and security key are correct, then repeat steps H and Restart. Then select Yes. Disabling NAT may have printed or saved these instructions to the modem.
6. Type your Ending IP Address and security key are correct, then your wireless network name and Password.